How is artificial grass installed?

How is artificial grass installed?

Green lush at the front and the back of your house is a desire every homeowner in las vegas has. Synthetic grass needs little or no maintenance, it is relatively easy to install, and its rich green color all over the year checks every box, right? So what do you need to Do-it-yourself the fake turf installation in your home or property? The following are a few tools you will need and the steps to follow when installing your synthetic grass.
[dt_gap height=”10″ /]
Tools required to install the synthetic;
•Water
•rake, shovel, and tape measure
•Hammer and flat head nails
•Utility knife and some spare blades too
•Synthetic grass joining tape- this can be found in any significant hardware facility.
•Compactor
•Power blower
•Whitewash sand
•Excavator- if the area of installation is large.
•Finely crushed rock.
The steps on synthetic grass installation are;
•Step 1: Remove the existing turf- it is time to remove the old and unpleasant turf that has been bothering you for some time now.
•Step 2: Compact the synthetic turf base- spread four inches of class two road base.
•Step 3: spread out and place the turf in place- be very cautious not to drag your turf across your freshly prepared base.
•Step 4: combine the pieces of fake turf.
•Step 5: trim the edges of the synthetic grass
•Step 6: Adjust the fake grass and set it in place.
•Step 7: Protect and sand the turf.
[dt_gap height=”10″ /]
You can enjoy your newly installed synthetic turf.